Dinosaur to noise converter

This is where I will make periodic entries regarding the build progress of my kit. I will post photos, and discuss work completed or problems encountered.
Post Reply
MikeFairbanks
Site Admin
Posts: 87
Joined: Fri Feb 24, 2023 1:51 pm
Location: Fairbanks, AK

Dinosaur to noise converter

Post by MikeFairbanks »

Big day on the airplane front... my engine has arrived!

I will be powering my Kitfox with a Rotax 916iS A, the newest engine in the Rotax 9 series.

Here is a description from the engine wiki page...
The engine is a turbocharged four-cylinder, four-stroke, horizontally-opposed, 1,352 cc (82.5 cu in) displacement, gasoline engine design, with a mechanical gearbox reduction drive with a reduction ratio of 2.54:1. It employs dual electronic ignition and produces 160 hp (119 kW) at 5800 rpm for takeoff and 137 hp (102 kW) at 5500 rpm continuous operation, with a maximum operating altitude of 23,000 ft (7,010 m).

It has electronic fuel injection; air cooling, with liquid-cooled cylinder heads; a stainless steel exhaust system; a dry sump, forced lubrication system with a separate oil tank; FADEC control and a 12 volt or 24 volt electric starter.

The initial time between overhaul is 2,000 hours.
72014298683__00211215-466C-4085-90C6-6B5745CF5A57.JPG
Post Reply