Bonding v-stab ribs in place
-
MikeFairbanks
- Site Admin
- Posts: 87
- Joined: Fri Feb 24, 2023 1:51 pm
- Location: Fairbanks, AK
Bonding v-stab ribs in place
Today I broke out the hysol and bonded the ribs into the vertical stabilizer for good. Lots of clamps to hold everything while the hysol cures... and some little rib holders, that keep the ribs perpendicular to the vertical tube. I had these made on Send Cut Send... they have a $29 minimum order, so I had 30 of them made to reach that amount... I ended up using 14.
- Attachments
-
-
-
- Rib holders to keep them square
-
- Top and bottom holds the rib firmly in place