You have to cut notches in these to follow the shape of the airfoiled tail, then drill the rivet holes for mounting.
Stab access flange
-
MikeFairbanks
- Site Admin
- Posts: 87
- Joined: Fri Feb 24, 2023 1:51 pm
- Location: Fairbanks, AK
Stab access flange
Today I did my final application of varnish until I start on the wings... and I got the first flange made for the stabilizer access panel.
You have to cut notches in these to follow the shape of the airfoiled tail, then drill the rivet holes for mounting.
Another short one will go down the front of the box, then repeat on the other side.
You have to cut notches in these to follow the shape of the airfoiled tail, then drill the rivet holes for mounting.
Another short one will go down the front of the box, then repeat on the other side.